Personalized EL Car Sticker Equalizer 50x25cm , Music Rhythm Eagle LED Flash Light Lamp

Specifications:

Easy installation: 
1, Stick the light inside the rear window with a 3M sticker. 
2, Connect the control box with the light using a 3meters length cable. 
3, Plug the car lighter. 
4, Start the music, it is cool especially at night! 

Hot selling sizes-Length × Width(cm): 
114*30CM 
90*25CM 
90*10CM 
80*19CM 
80*30CM
70*16CM 
60*20CM
50*30CM
45*11CM 
45*30CM 
30*11CM

Detail Description: 

1. Thickness of EL Car Sticker: EL car sticker is area light source. It is about 0.2 to 0.3 MM for the thickness. It is similar to the thickness of the name cards. 

2. Connecting Wires of El Car Sticker: It is about 2.5 meters long with 7 pins array lines and plug. 

3. Service Life of EL Car Sticker: It can work over 5,000 hours in total if under good working situation, that means the life can be about 3 years.

4. Safety Features: The flashing materials are EL panels with very low power consumption. There is no heat when EL panels work, so any problems might be caused by heat could not happen here.  

5. Products Features: It is bendable with soft structure. There is good deflection feature for the EL products. So that the EL products not only can be applied to the flat surface, but also to the products with  irregular shape. 

6. Quality Guarantee: All the electronic parts used in the EL products are complied to the standard of SGS and RoHS. They are green and friendly to the environment. There is no heat and radiation when the EL products work, so there is no harm to body.

Features:

•  Sound-activated colorful EL car sticker.
•  The sound sensitivity is adjustable by a knob as you need.
•  Designed to decorating your car, bring you with cool and gorgeous lighting show.
•  Easy to use, just plug to 12V DC power and it will produce beautiful effect.
•  It's a thin sheet with adhesive tape that can be stick on rear windshield or side window.
•  Equipped with a car charger that can be directly inserted into car to make lamp light.
•  The colorful LED lights will flash as the music rhythm, give you a romantic and fashional ambience.

Using method: 

This product is furnished with double faced adhesive tape and is covered with a protective membrane, you can remove membrane and stick to back windshield. 
Wire connection: A power cord with anode and cathode comes from the wire system of the small light which shows the width of a car, you can directly connect them together by connecting red cord to anode and back to cathode, it will light when you power-on the small lamps at night. 
Moreover, if there is a trouble for you to connect the wires in the car, you can demand to equip a lighter for cigarette instead, the lighter can be directly inserted into car to make lamp lightening. 
Standard  packing: 1PCS panel+ 1PCS inverter+ 1PCS cigarette